Flex Siser EasyWeed P.S. Film

Production Information Siser EasyWeed Flex P.S. Film

Pressing temperature: 150°C

Time: 15 seconds

Pressure: medium (3-4 bar)

Washing:
Wash at max 60°C . Please wait for 24 hours after pressing before washing. Do not use chlorine bleach or aggressive chemical agents

Dry cleaning: no

Tumble dryer: inside out (better if you air dry)

ATTENTION: The colors Rose Gold, Columbia Blue, Teal and Pearl have a shimmer!

The Siser P. S. Film flex films are suitable for cotton, polyester and polyester-cotton blends. The films are not suitable for silicone treated or sublimating fabrics.

Since the film has a polyester backing, no transfer film is necessary.

The Siser P.S. Film EasyWeed is suitable for multi-layer application.

Certified according to OEKO-TEX® Standard 100 class (except neon colors).

Average thickness: 90 micron

• Cut film mirror-inverted with cutting plotter (film only, not through carrier).
• Weeding
• Textile prepress for about 2-3 sec. at full press temperature
• Place on textile together with polyester carrier film
• Press on or iron on
• Remove polyester carrier film warm or cold
• When using an iron, make sure the surface is hard (no ironing board!). Press the design on with pressure for 15 seconds, do not go back and forth as with normal ironing. With the soleplate of a steam iron, it has holes for the steam to escape. Note that with these holes you will not reach the required temperature or pressure (iron must be moved accordingly). Iron without steam! Often the temperature of an iron is not regularly distributed and stable. This can lead to poor results.

We always recommend to do an application test before you start!

The colors shown are not binding and are for orientation purposes only.