Vinylfolie Ritrama Ri-Mark Event (M300), matte

Adhesive vinyl Ritrama matte M300 (Event)

Ritrama M300 is a matte monomeric vinyl film for indoor and outdoor use with an outdoor durability of up to 3 years, longer indoors. The Ritrama M300 vinyl film has a material thickness of 75 µ and is equipped with a transparent, weather-resistant adhesive.

The permanent acrylic adhesive has a slightly lower adhesive strength, so it is easier to remove than most other commercially available vinyl films - a real advantage for short-term lettering or lettering on shop windows and full-surface adhesion to panels.

Please note that monomeric films tend to shrink a bit more than polymeric plotter films, and films with a matte finish will absorb contaminants, such as soot in the air or insect impact, tar stains, etc., more readily than glossy plotter films. Ritrama Event M300 plotter film is one of the most widely used plotter foils in Europe and is made in England. It is particularly easy to weed.

When removing the vinyl film, we recommend heating it and peeling it off with a sharp edged angle.

Do not forget the transfer tape!

Info sheet: Mounting of long logos / texts

More tips for working with vinyl film

Film type: Polymer vinyl. Film thickness: 75 µ.

Storage advice: Adhesive films should be loosely rolled and always stored with the film side facing outwards.

Color deviations on monitors, smartphones etc. and self-made printouts (own printer) compared to the original color are unavoidable. We assume no liability for color deviations.