Flexfolie Glitter Plotter Marie

Pressing temperature: 150 -160°C

Time: 10 seconds
Pressure: medium (3-4 bar)
Washing:
Earliest 24 hrs after pressing wash at max 40°C (inside out). Do not use chlorine bleach or aggressive chemical agents.
Dry cleaning: no
Tumble dryer: yes, synthetic program

Size: 25x25 cm or A4 (21 x29.7 cm)

The glitter foil is suitable for polyester, spandex, cotton and polyester-cotton blended fabrics. The foil is not suitable for silicone treated or sublimated fabrics.
Glitter foils are not suitable for small fonts or details.
Since the film has a polyester back adhesive backing, there is no need for a transfer film / transfer foil.

Average thickness: 350 micron

For multi-layer application, use only as the top layer.

Foil application:

• Cut film mirror-inverted with cutting plotter (not through carrier).
• Weeding
• Pre-press textile for about 2-3 sec.
• Place on the textile together with the polyester carrier film
• Press on or iron on
• Remove polyester carrier film warm or cold

When using an iron, make sure the surface is hard (no ironing board!). Press the design on with pressure for 15 seconds, do not go back and forth as with normal ironing. With the soleplate of a steam iron, it has holes for the steam to escape. Note that with these holes you will not reach the required temperature or pressure (iron must be moved accordingly). Iron without steam! Often the temperature of an iron is not regularly distributed and stable. This can lead to poor results.

We always recommend to do an application test before you start!
The colors shown are not binding and are for orientation purposes only.

Color deviations of screens, smartphones etc. and self-made printouts (own printer) compared to the original color are unavoidable. We assume no liability for color deviations.